How To Install Soft Close Drawers

Stop your drawers from slamming close with soft-close glides. Installation takes simply an 60 minutes (or less!), and you'll be rewarded with a quieter kitchen.

If yous've ever gotten your fingers stuck in a closing drawer, then you'll desire to know this: Soft-close drawer glides are here to salve the solar day. They are affordable and piece of cake to utilise and can brand your kitchen a safer, quieter space.

Expect to spend roughly an 60 minutes on this projection, and make certain you lot're comfy using basic DIY tools like a drill, screwdriver, and level. We installed our guides in a kitchen, simply they also work well in a bathroom, bedchamber

What You lot Need

Soft-close side-mount drawer glides
Mounting plates
Drill
Screwdriver
Record measure
Pencil
Level

Footstep one: Remove Drawer and Hardware

Empty desired drawer and remove it from the chiffonier. Unscrew the existing drawer glide hardware from both the drawer and the cabinet.

Step 2: Install Drawer Glides

Place the drawer on its side. Marshal the glide affluent with the bottom of the drawer, existence sure the small extending office of the glide is positioned to the forepart of the drawer. Marking placement with a pencil. Spiral marked glide into identify, predrilling holes if desired. Repeat at the rear. Turn the drawer over and echo on the other side.

Step iii: Install Cabinet Glides

To install the cabinet hardware, pull the glide dorsum on the drawer to release the clip and remove part of information technology from the drawer. Attach the mounting clips to the glide, the front face frame clip, and the back of the cabinet box prune.

Step 4: Attach Clips

Adhere the face up frame clip to the cabinet with a screw and a screwdriver, predrilling holes if desired. Then attach the back mounting clip to the back of the chiffonier box, checking to make sure it's level before screwing information technology in.

Step 5: Make Needed Adjustments

Measure the distance of the drawer glide at the front of the box and the back of the box to make sure they're parallel. Make any necessary screw adjustments, then repeat on the other side. Slide drawer into the glides to make certain it all fits. Make any final adjustments, equally needed, and so screw in the rest of the screws.